Frequently Asked Question

Configuration for Wholesale in other devices or softswitches
Last Updated about a month ago

▸ Technical Guide — Wholesale / Softswitches
Configuration for Wholesale on other devices or softswitches
Asterisk · FreePBX · OpenSIPS · Kamailio · and other SIP devices
Basic reference values: This guide contains the minimum recommended configuration. Your device may require additional parameters not listed here. Contact us if you have questions.
???? SIP Credentials: The username and password are your SIP Account credentialsNOT your web portal credentials. Find them in the SIP Accounts / VoIP Accounts / extension data section of your AJTEL portal.
Available Servers
Server Host (IP) Domain (fromdomain) TLS + SRTP
SBC-TLS (con TLS) sbc-tls.ajtel.net sbc-tls.ajtel.net ✓ MANDATORY
SBC sbc.ajtel.net
IP: 216.238.73.38
⚠ Usar IP solo sin TLS
sbc.ajtel.net ✗ NOT required
▸ If you are not sure which server your account is on, contact us. Most accounts use sbc-tls.ajtel.net.
Configuration Parameters Server SBC-TLS

Enter the following values in your device, softswitch or configuration file:

username = (SIP ACCOUNT) ← NOT your web login
secret = (PASSWORD SIP) ← NOT your web password
host = sbc-tls.ajtel.net
fromdomain = sbc-tls.ajtel.net
dtmfmode = rfc2833
defaultexpiry = 180
allow = opus&g722&g729&gsm&ulaw&alaw
nat = force_rport,comedia
trustrpid = yes
sendrpid = yes
transport = tls
encryption = yes
port = 5061
Registration String Crítico

Use the following format for the register field, replacing the values in braces with your SIP credentials:

register = tls://{sipuser}:{sip-password}@sbc-tls.ajtel.net
{sipuser} Your SIP username — NOT your web login
{sip-password} Your SIP password — NOT your web password
Server SBC No TLS

If your account is hosted on the SBC server, use the following values. This server does NOT require TLS:

host = sbc.ajtel.net — o por IP: 216.238.73.38
⚠ If using the IP directly, do NOT use TLS (the certificate is bound to the hostname)
fromdomain = sbc.ajtel.net
transport = udp (no TLS)
port = 5060
▸ All other parameters (codecs, NAT, DTMF, credentials) are the same as the SBC-TLS server.
TLS — Mandatory (sbc-tls.ajtel.net)
El protocolo TLS es obligatorio para el servidor SBC-TLS. No TLS el tráfico será rechazado.
transport=tls / port=5061
????
SRTP — Audio Encryption
Also enable SRTP media encryption to ensure complete call security.
encryption=yes

Please Wait!

Please wait... it will take a second!